Product Line


Zoom +

WEH® Fuelling System TS50 CNG for installation in cars (ECE), version 1, tube Ø 8 mm, 200 bar

Add to Compare
  • ECE approval available
  • Integrated WEH® TN1 CNG receptacle (NGV1) with filter
  • Integrated starter cut-off micro switch (version 1 + 3)
  • Gas venting via protection hose (version 1 + 2)
  • Different fuel tank caps, acc. to design
Video
  • WEH® TS50 CNG | Fuelling System for NGV conversions
    WEH® TS50 CNG | Fuelling System for NGV conversions
    The WEH® TS50 CNG fuelling system has an integrated NGV1 receptacle. When retrofitting cars to natural gas, the TS50 CNG fuelling system is installed into the vehicle body panel. The two housings can be preinstalled within seconds and installed into the appropriate aperture in the vehicle body panel. The integrated receptacles have ECE approval and feature low noise refuelling.
Description
WEH® Fuelling System TS50 CNG for installation in cars (ECE), version 1, tube Ø 8 mm, 200 bar
WEH offers the fuelling system type TS50 CNG for retrofitting of vehicles to run on compressed natural gas.

The TS50 CNG fuelling system is a CNG conversion kit for quick and easy installation into the vehicle. The two housings can be preinstalled within seconds. The final installation is possible from the inside or outside of the vehicle.

The type TS50 CNG is equipped with a receptacle with filter compatible with the NGV1 profile and a starter cut-off micro switch. The micro switch interrupts the starter operation and prevents the vehicle from driving off during refuelling. The TS50 CNG is additionally equipped with a protection hose for gas venting. In case of a gas leakage the gas is diverted away from the connection.

The interior of the fuelling system is protected by a fuel tank cap from dirt and splash water thus reducing the danger of freezing.

On request type TS50 CNG is also available without tube for protection hose for gas venting and without starter cut-off micro switch.
Features
  • ECE approval available
  • Integrated WEH® TN1 CNG receptacle (NGV1) with filter
  • Integrated starter cut-off micro switch (version 1 + 3)
  • Gas venting via protection hose (version 1 + 2)
  • Different fuel tank caps, acc. to design
  • Protection against unauthorized use (version 1 + 3)
  • Dirt and splash waterproof construction
  • No danger of freezing
Technical Data
Nominal bore (DN) 8 mm
Pressure range PN = 200 bar (3,000 psi) | PS = 260 bar | PT = 390 bar (ECE)
Temperature range -40 °C up to +120 °C
Material Housing: plastic, receptacle: corrosion resistant
Sealing material Natural gas compatible
Design Incl. TN1 CNG receptacle with filter (40 micron),
starter cut-off micro switch (protection type IP679),
tube for protection hose for gas venting, fuel tank cap and fittings
Conformity / Tests / Approvals ECE R110
Part No. C1-106410
Application
Fuelling system for installation in cars.
Inquiry List

 

You have no items in your inquiry list.

Back to Top