Description
WEH® Filter TSF4 H₂ for installation in H2 fuelling stations, T-Filter with tube Ø 12 on both sides, Filter 10 Micron, 350 bar
Contaminants in the gas flow can enter the vehicle‘s storage tank during refuelling. These dirt particles in the hydrogen fuel may cause damage to the sealing components. WEH, therefore, offers H2 filter for clean hydrogen. Solid particlesare captured reliably.The filter element can be removed and is re-usable after having been cleaned.
The T-filter TSF4 H2 with double ferrule fitting on both sides is mainly used in fuelling stations and dispensers, but can also be used onboard H2 powered vehicles.
Features
- For hydrogen free of impurities
- Filter insert can be cleaned
Technical Data
Nominal bore (DN) | 10 mm |
Pressure range | PN = 350 bar (5,000 psi) | PS = 450 bar | PT = 675 bar |
Temperature range | -40 °C up to +85 °C |
Media inlet | Tube Ø 12, double ferrule fitting |
Material | Corrosion resistant stainless steel |
Sealing material | Hydrogen compatible |
Filter element | 10 micron |
Design | Incl. fittings (only for check valves with tube fitting) |
Conformity / Tests / Approvals | PED 2014/68/EU |
Part No. | C1-58026 |
Application
T-Filter with double ferrule fitting on both sides for installation in H2 fuelling stations .
Only use filters with EC79 approval for fitment in vehicles!
Only use filters with EC79 approval for fitment in vehicles!
Downloads