Product Line


Zoom +

WEH® Connector TW800 for testing of bead, rim, collar flange, stub or male thread, grip sleeve actuation - Product family

Add to Compare
  • Automation possible
  • Connection in seconds
  • No hand tightening required
  • Increased productivity & Cost reductions
  • WEH® Jaw Locking Mechanism
Video
  • WEH® TW800 | Diverse application possibilities
    WEH® TW800 | Diverse application possibilities
    The WEH® TW800 Quick Couplings are ideal for low pressure testing of automotive component at vacuum or pressures up to 50 bar, i.e.supply lines for cooling water, heating water, oil, etc. and for function testing of pressure vessels, cooling systems, hoses and tubes.
  • WEH® TW800 | Function
    WEH® TW800 | Function
    The quick release coupling TW800 is easy to use. Only pull back the grip sleeve and push the WEH® Quick Disconnect onto the test piece as far as the stop. Then push the grip sleeve forward, the clamping jaws are locked and the pressure-tight connection is made. Testing can now proceed.
  • WEH® TW800 | Connection Possibilities
    WEH® TW800 | Connection Possibilities
    The TW800 quick coupling for function and pressure tests connects in seconds to components with a bead, rim, collar, flange, stub or external thread.
Description
WEH® Connector TW800 for testing of bead, rim, collar flange, stub or male thread, grip sleeve actuation - Product family

The WEH® TW800 Quick Connector is ideally suited for function and pressure testing within the low pressure range up to 50 bar max. He establishes a leaktight connection to components with bead, rim, collar, flange, stub or male thread in just seconds - without tedious hand tightening. Additional sealants and sealing tapes are not required.

Simply pull back the grip sleeve and place the connector onto the test piece port. Thanks to the time-saving handling, testing times are significantly reduced and workflows facilitated. The high flow rate ensures, in addition, an enhanced productivity at the test bench.

Made from high quality stainless steel, the connector meets the high demands of industrial testing and is also suited for automated test procedures.

In the automotive industry, the WEH® TW800 quick release coupling is also used for leak testing of fuel connections, connections for cold and hot water and other supply lines as well as refrigeration and air conditioning components.

Features
  • Automation possible
  • Connection in seconds
  • No hand tightening required
  • Increased productivity & Cost reductions
  • WEH® Jaw Locking Mechanism
  • High-grade materials
  • Special versions possible
Technical Data
Max. allowable operating pressure PS Vacuum up to 50 bar (725 psi)
Temperature range +5 °C up to +80 °C
Leak rate 1 x 10-3 mbar x l/s
Actuation Manual actuation via grip sleeve
Material Corrosion resistant stainless steel
Sealing material Front seal of NBR
Application

Quick connector for pressure and function testing of components with a bead, rim, collar, flange, stub or male thread at low pressure ranges for the following standard sizes:

  • Beads for hose connections
  • Whitworth tube thread to DIN EN ISO 228-1 | G1/2" up to G3/4"
  • SAE J514 JIC 37° | UNF 7/16"-20 up to UNF 7/8"-14

For automotive applications, the TW800 is used for testing fuel lines, radiators, ACR components and other sub-assemblies for the automotive industry.
It is also used in electromobility for testing e-axles, cooling water pipes of electric machines and electric motors.
Another application is function testing compressors, heat exchangers, measuring devices, hoses, tubes and tanks. The test connector is also an ideal tool for automated leak testing during production, automatic systems and robotics.

Leak testing of engine with quick coupling TW800
TW800 Testing of engines
Leak test on engine test bench with quick coupler TW800
TW800 for connection to fuel lines for
engine hot testing
Test connector TW800 with 90° media inlet
TW800 with 90° inlet
Downloads
Document type Format Size Download
Datasheet PDF 381 KB
Inquiry List

 

You have no items in your inquiry list.

Read more

Fast test connections for components with formed tubes - WEH® TW800

The sleeve actuated quick coupling TW800 is the ideal test fitting for low pressure testing, leak testing and function testing of components with swaged, flared and other formed tubes. They offer quick connect and quick disconnect thanks to the WEH® Jaw Locking Mechanism and the easy to operate sliding sleeve. Just push to connect. The TW800 quick release coupling is mainly used for testing automotive components during production and hoses, tubes and tanks.

Back to Top