Product Line


Zoom +

WEH® Connector TW230 for bores and tube ID 22.2 mm (7/8"), clamping lever actuation, vacuum up to max. 70 bar

Add to Compare
  • Connection in seconds
  • No hand tightening required
  • For connection into straight tubes and bores
  • WEH® Jaw Locking Mechanism
  • No seal adjustment required
Video
  • WEH® TW230 | Straight tube leak testing within seconds
    WEH® TW230 | Straight tube leak testing within seconds
    The quick coupling TW230 is the right tool for vacuum tests and pressure tests up to max. 70 bar. The quick release coupling seals pressure-tight the interior tube diameter. Thus being ideal for function testing of components with tube connection.
  • WEH® TW230 | Function
    WEH® TW230 | Function
    The WEH® TW230 lever-actuated quick connect is very easy to operate. Only place the TW230 quick coupling into the bore or straight tube of your test piece and turn the lever through 90° to seal the test piece. Then test pressure can be applied and vacuum or pressure testing up to 70 bar can proceed.
Description
WEH® Connector TW230 for bores and tube ID 22.2 mm (7/8"), clamping lever actuation, vacuum up to max. 70 bar

The Quick Connector WEH® TW230 for bores and tubes of copper, seel and aluminium is ideal for pressure and vacuum testing, as well as for underwater, pressure decay and helium tests. The Connector seals reliably inside tube and bore diameters of 22.2 mm (7/8") - establishing safe & pressure-tight connections in just seconds.

The radial sealing is very reliable and brigdes tube tolerances of up to ± 0.25 mm (required roundness of internal tube diameter max. 0.25 mm). There is no seal adjustment required.

Connection to the inner tube diameter is established by simple actuation of the manual clamping lever. Thanks to the WEH® Jaw locking mechanism the connector is securely located - expensive clamping devices are eliminated. The timesaving handling shortens connection times and simplifies workflows. Thus increasing productivity. Thanks to the WEH® Jaw locking mechanism wear and distortion of the test piece are minimised as surface pressure is very low.

The quick connector WEH® TW230 is equipped with a NBR front seal. Other sealing materials are available on request. It is the customer‘s responsibility to clarify the media compatibility.

The quick coupling is also used for leak testing fo heat exchangers, air conditioners, tubing and heating systems in the refrigeration and air conditioning industry, as well as for testing radiators and water connections for engine testing in the automotive industry.

Features
  • Connection in seconds
  • No hand tightening required
  • For connection into straight tubes and bores
  • WEH® Jaw Locking Mechanism
  • No seal adjustment required
  • Wide range of tube tolerances up to ± 0.25 mm
  • High-grade materials
Technical Data
Max. allowable operating pressure PS Vacuum up to max. 70 bar (1,015 psi)
Temperature range +5 °C up to +80 °C
Connects to Tube/Bore ID 22.2 mm (7/8")
Media inlet G1/8" internal thread
Max. allowable surface finish of test piece Roughness ≤ Rz8 μm
Max. allowable material hardness of test piece Max. hardness 28 HRC
Leak rate 1 x 10-3 mbar x l/s
Actuation Manual actuation via clamping lever
Material Clamping jaws: Corrosion-resistant stainless steel, hardened
Housing: Anodized aluminium
Sealing material Front seal of NBR
Conformity / Tests / Approvals PED 2014/68/EU
Part No. C1-128821
Application
Quick connect / disconnect TW230 for sealing in straight tubes and bores. Sealing in the internal diameter Ø 22.2 mm (7/8“). Typical applications are pressure testing / vacuum testing / pressure decay testing / helium testing on components for HVAC-R industry / manufacturing industry / automotive industry:
  • Heat exchangers
  • Air conditioners
  • Heating systems
  • Pressure vessels
  • Valves
  • Transducers
  • Compressors
  • Condensers
  • Evaporation coils
  • Component and tubing systems
  • Cooling system for automotive industry
  • Water nozzles for engine testing
TW230 for testing of cooling systems
Downloads
Document type Format Size Download
Datasheet PDF 310 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top