The TW18H is simply placed onto the connecting thread of the test piece. The clamping jaws firmly grip onto the thread establishing a safe & pressure-tight connection within seconds.
Additional sealants and sealing tapes are not required. Time-consuming and expensive clamping and testing devices are eliminated. The TW18H is therefore the ideal tool for frequent connection and disconnection.
The WEH® TW18H Connector is equipped with a manual actuation lever and available for low pressure up to max. 50 bar.
- Connection in seconds
- No hand tightening required
- WEH® Jaw Locking Mechanism
- Ergonomic design
- High-grade materials
- Automation possible
- Testing devices are eliminated
Max. allowable operating pressure PS | 50 bar (725 psi) |
Temperature range | +5 °C up to +80 °C |
Connects to | G1/2" male thread |
Media inlet | G1/2" female thread |
Leak rate | 1 x 10-3 mbar x l/s |
Actuation | H = manual actuation of the lever |
Material | Corrosion resistant stainless steel, anodized aluminium |
Sealing material | Front seal of NBR |
Part No. | C1-15173 |
Quick connect / disconnect for pressure testing / function testing of pneumatic components / hydraulic components in the automotive industry / manufacturing industry with male thread for the following standard sizes:
- Whitworth tube thread to DIN EN ISO 228-1 | G1/2" male thread
The TW18H Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses, cylinders and hydraulic components. The quick coupler is also suitable for installation in automated systems.