Product Line


Zoom +

WEH® Connector TW04 for testing of components with male thread, manual actuation, vacuum up to max. 50 bar - Product family

Add to Compare
  • Pressure-tight connections by hand-tightening
  • Simple seal replacement
  • Ergonomic design
  • High-grade materials
Description
WEH® Connector TW04 for testing of components with male thread, manual actuation, vacuum up to max. 50 bar - Product family

The WEH® Quick Connector TW04 is the perfect tool for pressure and vacuum testing of components with male thread up to 50 bar max, as well as for filling and venting.

Only place the connector onto the threaded port and hand-tighten it until the o-ring seal contacts the test piece - the pressure-tight connection is established. The WEH® TW04 seals without wrenches, sealants or tape saving connection time & costs.

The higher the test pressure, the tighter the WEH® Connector will clamp itself onto the test piece port. The pressure-assisted piston ensures a pressure-tight connection.

Wear-resistant NBR seals meet most industrial requirements and are very durable. The connector is extremely easy to maintain with simple seal replacement and minimizes down-time.

The WEH® TW04 Screw connector is equipped with a swivel joint as standard enabling the connector to be turned into the most convenient position and eliminates any twisting of the media line. This provides the operator with easy and convenient handling.

Features
  • Pressure-tight connections by hand-tightening
  • Simple seal replacement
  • Ergonomic design
  • High-grade materials
Technical Data
Max. allowable operating pressure PS Vacuum up to 50 bar (725 psi)
Temperature range +5 °C up to +80 °C
Leak rate 1 x 10-3 mbar x l/s
Actuation Hand-tightening
Material Corrosion resistant stainless steel
Sealing material Front seal of polyurethane or NBR
Application

Screw connector for pressure testing / vacuum testing of components with male thread for the following standard sizes:

  • 'G'-thread to DIN 259 or ISO 7/1 or DIN EN ISO 228-1 | G1/8" up to G1"
  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" up to NPT 1"

The TW04 Screw connector is suitable for testing fittings, fixtures, tubes / pipes, boilers, tanks, radiatiors, hydraulic manifolds / hydraulic blocks, turbine housings and automotive components.

Screw connector TW04 for pressure testing of components with external threads
TW04 for testing external threaded components
TW04 Screw connector for external threads
TW04 for sealing externally threaded ports
(disconnected)
Vacuum testing with screw connector TW04
TW04 for sealing externally threaded ports
(connected)
Downloads
Document type Format Size Download
Datasheet PDF 324 KB
Inquiry List

 

You have no items in your inquiry list.

Read more

Quick connect pressure fitting for testing on external thread - WEH® TW04 Twist to connect

WEH offers fastest connectors for components with external thread. The connector TW04 is the ideal test fitting / tool for pressure testing, vacuum testing and leak testing. It provides fast leak tight connection by hand-tightening. Just twist to connect – no tapes, no thread sealants. The TW04 is also suitable for filling, plugging and venting of automotive components.

Back to Top