Depress the pilot actuation button and simply push the WEH® TW17 Quick Connector into the female thread of the gas cylinder. Release the valve button and the pressure-tight connection is made.
The cylinder can now be leak tested with water. The test procedure is regulated by an external control unit and is ideally suited for automation, automated testing systems.
- Automation possible
- Suitable for water pressure testing of gas cylinders
- Connection in seconds
- No hand tightening required
- Increased productivity & Cost reductions
- Different actuations
- WEH® Jaw Locking Mechanism
- Robust construction
- High-grade materials
Nominal pressure PN | 280 bar (4,060 psi) |
Max. allowable operating pressure PS | 350 bar (5,000 psi) |
Pilot pressure | 6 - 8 bar (90 - 120 psi) air |
Temperature range | +5 °C up to +80 °C |
Media inlet | M16x1.5 male thread, Ermeto 24° ´S´ |
Medium | Water |
Material | Corrosion resistant stainless steel and brass |
Sealing material | NBR |
Fast test connection for internally threaded gas cylinders - WEH® TW17
The manually or pneumactically actuated quick coupling TW17 is the ideal test fitting for high pressure testing and leak testing of gas cylinder with water. They offer quick connect and quick disconnect thanks to the WEH® Jaw Locking Mechanism - Just push to connect. The TW17 quick release coupling is mainly used in the gas industry.